Compact transfer and non-return valve with a nominal opening pressure of 0.29psi.

• Approved to ISO 9650 and ISO 15738 as a transfer valve
• Very smooth low profile
• High flow for size

High flow transfer valve with very smooth profile also available as a non-return valve with a nominal opening pressure of 0.25psi.

• Very smooth external profile
• High flow
• Low, smooth internal profile to protect fabric when deflated

Small, compact and cost-effective. This valve is widely used as a transfer valve into the arch tube of liferafts.

• Very compact size
• Good flow rate due to low opening pressure
• Approved for SOLAS liferafts to ISO 15738

Allows fast connections to be made between separate chambers, providing a high flow with a clear 24mm diameter between chambers.

• Allows quick connection of separate inflatable chambers
• Allows high flow between chambers
• Robust and leak tight

Very high flow transfer valve with a wide pressure range also available as a non-return valve with a nominal opening pressure of 0.25psi.

• Low profile
• Smooth internal profile to protect fabric when deflated
• Rapid installation with clamp fitting

Where the risk of damage to the fabric of the structure due to vibration or impact is high, the A4 Transfer Valve can provide the solution.

• Moulded rubber construction avoids damage to fabric
• Bonds into the fabric
• Rugged

The patented Switchable Transfer Valve allows intercommunication between adjacent chambers of an inflatable boat.

• Allows an internal link between adjacent chambers to be switched open or closed.
• Allows high flow between chambers during inflation and deflation.